VISERA ELITE II Video system center
VISERA ELITE II Video system center
The VISERA ELITE II video system center combines the LED light source and the processor in one box.
It defines a new means of simplicity in the OR. One single cable for 2D observation and an intuitive touch panel for control, with no interruption of the procedure.
Power Supply | Rated voltage | 100-240 V AC; within ±10% | |
---|---|---|---|
Rated frequency | 50/60 Hz; within ±1 Hz | ||
Rated input | 400 VA | ||
Size | Dimensions (maximum) | 383 (W) × 199 (H) × 506 (D) mm | |
Weight | 19.3 kg | ||
Observation | Analog signal output | VBS composite and Y/C; simultaneous outputs possible. | |
Digital signal output | HD-SDI (SMPTE292M), DVI (WUXGA, 1080 pixels, or SXGA can be selected) | ||
Electronic zoom | The image enlargement level can be selected. 3 modes (1.0×, 1.2×, 1.5×) | ||
Optical-digital observation | The optical-digital observation can be performed. The endoscope compatible with the optical-digital observation is required. | ||
NBI observation | This observation mode uses narrow-band light | ||
IR observation | This observation mode uses infrared light | ||
Documentation | Remote control | The following ancillary equipment can be controlled (specified models only): • Portable memory / • Video recorder / • Video printer / • Image filing system |
|
Recording format and number of recorded images in internal memory | TIFF: no compression | Approx. 120 images | |
JPEG (1/5): Approx. 1/5 compression |
Approx. 636 images | ||
JPEG (1/10): Approx. 1/10 compression |
Approx. 1108 images | ||
These are the numbers of recorded images when both HDTV and SDTV images are recorded. These numbers vary depending on the images. |
|||
Illumination | Examination lamp | LED | |
Cooling | Forced-air cooling | ||
Providing maximum light intensity | Less than 5.64 W (approximately same as Olympus light source that is mounted xenon short-arc lamp 300 W) | ||
Observation mode | WLI or NBI observation | ||
IR observation (when connected to CLV-S200-IR) | |||
Automatic Brightness Adjustment | Automatic brightness adjustment method | LED drive current control | |
Automatic exposure | 17 steps | ||
Brightness mode | Auto | ||
Manual | |||
Classification (Medical Electrical Equipment) | Type of protection against electric shock | Class I | |
Degree of protection against electric shock of applied part | Depends on applied part. Also refer to applied part (camera head or videoscope). | ||
Degree of protection against explosion | The video system center should be kept away from flammable gases |
Contents end